Client settings

To configure Client Settings

1. On the left navigation pane, expand Industrial Graphics Server, and select Client Settings.

   

2. Under Graphic Refresh Rate, set the screen refresh interval. This determines how frequently the web browser will query the web server for graphic data. A longer interval reduces network traffic and may be needed for very low-bandwidth networks or intermittent connections.

   • Default: 1000 ms (1 second)

   • Minimum: 250 ms

   • Maximum: 60000 ms (60 seconds)

   Note: The Graphic Refresh Rate cannot be less than the Alarm Refresh Rate. If you lengthen the Graphic Refresh Rate, the Alarm Refresh Rate will automatically synchronize with the Graphic Refresh Rate.

3. Under Alarm Refresh Rate, set the alarm refresh interval. This determines how frequently the web browser will query the web server for alarm data. By default, the Alarm Refresh Rate is the same as the Graphic Refresh Rate. You can make the refresh interval longer for alarms than for graphics, but the Alarm Refresh Rate cannot be shorter than the Graphic Refresh Rate. A longer interval may be needed for very low-bandwidth networks or intermittent connections.

   • Default: 1000 ms (1 second)

   • Minimum: Graphic Refresh Rate

   • Maximum: 60000 ms (60 seconds)