Radial Dimensions ​. ​. ​.

AKEY  option

- stores the code of a dimensional attribute of the Design element type that is to be dimensioned. Option dependent on Design element type. Default DIAM.

DFLA  option

- controls whether the dimension line is drawn from the centre (Radius) or across the diameter (Diameter). option = DIAMETER or RADIUS, default RADIUS.

DDEG value

- controls angle at which dimension line displays, relative to the 2D

DTFL  option

- controls whether the text radius DTRAD is measured from the CENTRE, MIDPOINT or CIRCUMFERENCE of the radial dimension. Default CENTRE

DTRA  value

- radial position of the dimension text origin from the centre or circumference

DTRA @

- (according to the DTFL setting) of the dimensioned object.

DTRA FLAG  option

- modifies DTFL and recalculates DTRA to keep same visual appearance. option = CENTRE, MIDPOINT or CIRCUMFERENCE.

DTAN  option

- controls the Dimension text angle.

option = STANDARD, HORIZ, VERT, default

STANDARD.

DSTY  option

- combined with DTAN, controls the overall dimension style. Option = DIMLINE, LEADERLINE, EXTERNAL, default DIMLINE.

CHSTYLE  option

- controls the drawing style used for the optional horizontal and vertical fixed crosshair markers that mark the centre of the circle/arc being dimensioned. option = OFF (default), integer or line pattern.

CHCOLOUR value

- controls the drawing colour. Value can be a colour number or pre-defined colour name.

CHOS value

CHOS @

- controls the distance by which the crosshairs overshoot the circle/arc circumference. value can be negative, default 6.

ASUB value

- controls the angle subtended by the optional projection arcs at the circle/arc circumference. For DFLAG DIAMETER two arcs are drawn, one at each end of the dimension line; for DFLAG RADIUS only one arc is drawn. The midpoint of these arcs intersects the dimension line. ASUB 180 generates a circle for a diameter dimension.