Supported paths (channels)
- Last UpdatedFeb 23, 2023
- 1 minute read
PI Connector FANUC Focas is designed and implemented to support all paths (channels) that are available by the FANUC Focas communication standard. The paths (channels) include:
|
Channel number |
Description |
|---|---|
|
0 |
The 1st path |
|
1 |
The 1st path |
|
2 |
The 2nd path |
|
3 |
The 3rd path |
|
4 |
The 4th path (Only Series 30i) |
|
5 |
The 5th path (Only Series 30i/ for loader (except Series 30i)) |
|
6 |
The 6th path (Only Series 30) |
|
7 |
The 7th path (Only Series 30) |
|
8 |
The 8th path (Only Series 30) |
|
9 |
The 9th path (Only Series 30) |
|
10 |
The 10th path (Only Series 30) |
Although the connector is able to set any path (channel) listed above to the CNC machine, due to the compatibility with the machine type, the actual function call may be rejected by the machine. Even if a path is set successfully, the connector may not be able to get data from that path if there is no data available.