Configure the AVEVA Edge IoT View module

To configure the AVEVA Edge IoT View module for Linux (x64):

1. Select the specific version of the module you wish to configure from the Versions drop-down.

2. Specify the Studio Mobile Access Port number. This is the TCP port that will be exposed on your edge device for accessing the Studio Mobile Web Access interface on your local network.

3. Specify the OPC UA Server Port number. This port will be exposed on your edge device for connections with the OPC UA server task.

4. Specify a value for Log Verbosity. This controls the detail level of messages logged to the IoTView log. Integer values from 0 to 5 are valid, where 0 results in no logging, and 5 results in the maximum amount of logging.

5. Select the Project Configuration (Zip) field to upload a configuration for the module. A file Open dialog displays. Locate and select the ZIP file containing your project, and click Open.

   Important: Make sure your project is built using a version of AVEVA Edge Studio that is compatible with the module version you selected in step 1. Uploading an incompatible project configuration can cause your device to get stuck in the "deploying" state. If this occurs, you can fix the issue by selecting a compatible project ZIP file and updating your device once again.

6. Select Update to save your changes.