Configure daily and hourly time events for Factory 1
- Last UpdatedJan 14, 2025
- 2 minute read
- PI System
- PI Event Frames Generator 5.1.7
- Interfaces
Configuring daily events
Configure the settings for this event type as follows:
|
Field |
Setting |
|---|---|
|
Configuration Name |
Factory 1 TIME.Day |
|
Event Frame Template |
Time.Day |
|
Active Point Name |
TIME.YEARMONTHDAY |
|
Active Point Behavior |
Step |
|
Event Frame Name |
Choose Use Active Point value |
No attribute configuration is required.
|
Attribute Name |
Configuration |
Value |
|---|---|---|
|
Day Type |
PIPoint |
TIME.DAY_TYPE |
|
Day of Week |
PIPoint |
TIME.DAY_TEXT |
|
Month |
PIPoint |
TIME.MONTH_TEXT |
|
Year |
PIPoint |
TIME.YEAR |
|
Day Date |
PIPoint |
TIME.DAY |
Select the Other Settings tab. For the primary reference element, configure Factory 1. In the Default Settings section, check Enable and configure a recovery time of 5 days and an evaluation delay of 10 seconds. To save the configuration, select Save Settings.
Configuring hourly events
Configure the settings for this event type as follows:
|
Field |
Setting |
|---|---|
|
Configuration Name |
Factory 1 TIME.Hour (add as child of Factory 1 TIME.Day) |
|
Event Frame Template |
TIME.Hour |
|
Active Point Name |
TIME.HOUR |
|
Active Point Behavior |
Step |
|
Event Frame Name |
Choose Use Active Point value |
Configure attributes as follows:
|
Attribute Name |
Configuration |
Value |
|---|---|---|
|
Peak Type |
PIPoint |
TIME.HOUR.PEAKTYPE |
|
Day Date |
PIPoint |
TIME.DAY |
Select the Other Settings tab. For the primary reference element, configure Factory 1. In the Default Settings section, check Enable and configure an evaluation delay of 10 seconds. To save the configuration, select Save Settings.
Configuring peak events
Configure the settings for this event type as follows:
|
Field |
Setting |
|---|---|
|
Configuration Name |
Factory 1 TIME.PeakType (add as child of Factory 1 TIME.Day) |
|
Event Frame Template |
TIME.PeakType |
|
Active Point Name |
TIME.HOUR.PEAKTYPE |
|
Active Point Behavior |
Step |
|
Event Frame Name |
Choose Use Active Point value |
Configure attributes as follows:
|
Attribute Name |
Configuration |
Value |
|---|---|---|
|
Peak Type |
PIPoint |
TIME.HOUR.PEAKTYPE |
|
Day Date |
PIPoint |
TIME.DAY |
Select the Other Settings tab. For the primary reference element, configure Factory 1. In the Default Settings section, check Enable and configure an evaluation delay of 10 seconds. To save the configuration, select Save Settings.