Configure temperature excursion events
- Last UpdatedJan 14, 2025
- 1 minute read
- PI System
- PI Event Frames Generator 5.1.7
- Interfaces
Configure the settings for this event type as follows:
|
Field |
Setting |
|---|---|
|
Configuration Name |
RE100 Excursions |
|
Event Frame Template |
Excursions.Temp |
|
Active Point Name |
RE100.Excursion.Temp.Active |
|
Active Point Behavior |
Pulse |
|
Event Frame Name |
Choose Use this PIPoint value and enter RE100.Excursion.Name |
In the Attribute Names table, configure the following attributes:
|
Attribute Name |
Configuration |
Value |
|---|---|---|
|
Type |
PIPoint |
RE100.Downtime.ReasonCode |
|
Phase |
PIPoint |
RE100.Phase |
Select the Other Settings tab and configure the path for the primary reference element to refer to RE100 using the PI AF Element Search button, as shown in the following figure.
In the Default Settings section, check Enable and configure the following settings:
-
Recovery Time: 1 day
-
Evaluation Delay: 40 seconds.
To save the configuration, select Save Settings. To generate events, start the interface.