Supported Hardware and Software

These are the technical specifications for the OMRONFINS OI Server.

Requirements

OMRONFINS OI Server requires OI Core G-1.2 or later

Supported Hardware and Software

This OI Server connects to Omron PLCs on a FINS network, which includes the following devices:

• CS1, CJ1, CJ2, and CP1 series using CS1 mode

• CV, CVM1, and CVM1D series using CV mode

• Any other device that is FINS compatible

For Ethernet communication, CS1 PLCs can use either the FINS – UDP (Ethernet) protocol or the RS-232 protocol. (The specific protocol can be selected in the communication settings.).

For serial communication, CS1 PLCs use a FINS – Host link.

To program CS1 PLCs, you need the CX-Programmer programming software. For more information, go to: http://industrial.omron.eu/en/products/catalogue/automation_systems/software/configuration/cx-one/cx- programmer.html

Note: Connecting to a PLC via ETN is tested and supported. However, connecting via an EIP Ethernet card is not supported.

For a list of supported hardware and firmware versions, refer to the Technology Matrix.

Conformance

The following hardware and software was used for conformance testing of this OI Server.

CS1 mode:

• CJ1 – CPU12

• CJ2 – CPU64 – EIP

• CS1G – CPU45H

• NJ501 -1300

• CP1L – CPU M

CV mode:

• CVM1-V2 – CPU11