Advanced System Monitor Configuration

An instance of the System Monitor Agent is installed on every node. Each agent communicates with the System Monitor Manager through TCP/IP and uses the Common Platform settings. Each System Monitor Agent must use the same port number that was configured for the System Monitor Management Server. See Configuring the System Management Server for additional information.

If you have changed the default port settings for the System Management Server, use the Advanced Configuration settings to configure the TCP/IP port numbers for the System Monitor.

To configure the System Monitor Manager TCP/IP Port Numbers

Note: Configure the System Management Server before you configure the System Monitor Manager ports.

1. In the Configurator, select the System Monitor Manager entry, under AVEVA System Monitor.

2. Click the Advanced button. The Advanced Configuration dialog window opens.

   

3. Set the port number. Unless you changed default port numbers, no changes should be needed.

   • If System Platform is configured to use a secure mode of operations, that is, if the System Management Server option is configured, set the SSL port to the same number that was configured for Common Platform communications. The default SSL port is 443.

   • If security is not configured for System Platform, that is, if no System Management Server option is configured, set the HTTP port to the same number that was configured for Common Platform communications. The default HTTP port is 80.

4. Press OK, and then Close to exit Advanced Configuration.

5. Select the next item in the left pane that requires configuration. When all required items have been configured, press the Close button to complete installation. See System Restart after Configuration.