Ports Tab

The System Management Server uses HTTP and HTTPS for communications with certain AVEVA software, such as the AVEVA System Monitor. Remote nodes must be configured with the same port numbers as configured here.

By default, the System Management Server uses HTTP port 80 and HTTPS port 443. Generally, you can use the default settings. To change the default ports, click the Advanced button, then select the Ports tab and edit the port numbers as needed. See Changing Ports for the System Management Server for more information.

• Default HTTP port: 80

• Default HTTPS port: 443

Some Application Server communications drivers require some additional, manual configuration if you change the default port(s) used for the System Management Server. This manual configuration is required if you changed a port for the System Management Server and are using either the MQTT Communications Driver or the Auto Build function in Application Server. See Changing Ports for the System Management Server for more information.

Important! If you have installed InTouch Access Anywhere Secure Gateway on the same node as other System Platform components, there will be a port conflict if you keep the default port settings for System Management Server. You can either (1) change the Common Platform Port number(s) in the Advanced Configuration dialog to proceed or, (2) edit the configuration file for the Secure Gateway. See Configuring Ports for the InTouch Access Anywhere Secure Gateway for information on changing the port number.