Transfer Gas Quality (GQ) Data via the Request Connector from AVEVA Measurement Advisor

The AVEVA Measurement Advisor stored procedure [dbo].[scadaGQDownloadGet] is called from the MonitorMeasurementData process running on the ACM server to retrieve the gas quality information and pass it along to ACM. For more information, see the following topic in the AVEVA Measurement Advisor Developer Guide "[dbo].[scadaGQDownloadGet]" topic in addition to the "Prepare for and Send the Zone Quality (ZQ) Download to Autosol Communication Manager (ACM)" in the AVEVA Measurement Advisor Installer Guide.

The following object configuration is required for the download to occur:

• The meter connected to the ZQ should have "Enable Automatic GQ Download" enabled (Orifice EFM, Pulse EFM, Corrector Meter tabs). Other meter types will send data with no additional configuration needed.

• ZQ should have:

  • "Enable automatic download" enabled.

  • "Download Real-Time only" disabled.

    Note: When new or updated zone quality (ZQ) data is received by AVEVA Measurement Advisor, AVEVA Measurement Advisor will analyze the data and compare any changes to configured tolerances. If a change exceeds its related tolerance check, it will queue the zone quality data for download to the required SCADA system. For more information, see Properties for Gas Quality (GQ): Zone Analysis Tab in the AVEVA Measurement Advisor User Guide.