System Monitor Manager configuration

By default, the System Monitor Manager is installed on the Galaxy Repository node. There should only be one System Monitor Manager per AVEVA System Platform topology, and each node being monitored should be configured to point to it.

Configure System Monitor Manager

1. Start the Configurator.

2. In the left pane, under AVEVA System Monitor, select System Monitor Manager.

   

3. In the System Monitor Manager Name field, enter either the computer name (preferred) or the IP address of the node that will act as the System Monitor Manager.

   If you are configuring the current node as the System Monitor Manager, enter its name or IP address. If you have configured secure communications for the Common Platform, the machine name needs to be used (the IP address is not supported for secure communications).

   Note: TCP/IP is used for communications between System Monitor Agents and the System Monitor Manager.

4. Select Test Connection to check that the node you are configuring can reach the System Monitor Manager node.

5. Select Configure.

6. Select the next item in the left pane that requires configuration. When all required items have been configured, select Close to complete the configuration.