Summary of events and alarms

Value = <NUMBER> <ALARM STATE>.

The Value information provided indicates the value that created an alarm state. The Category column indicates the kind of alarm that occurred.

As the alarms are used and defined by your organization to indicate any number of situations, it might be prudent to check to see if everything is functioning as it should.

After confirming that the situation is manageable, you may acknowledge the alarm, if you wish.

Modified <METER/GQ FIELD> from <PREVIOUS VALUE> to <CURRENT VALUE>.

This provides information and an audit trail indicating which field has been changed.

Informational. No action required.

Failed to perform <TYPE OF> calculation for <TYPE:NAME>.

This provides an indication that the <TYPE OF> calculation failed.

Wait and see if the calculation is performed successfully in later attempts. Refer to the error log for more information. By default, the error log exists in %DNADataRoot%\RealTime\log.

Calculations performed successfully. Point is re-enabled.

The provides an indication that the calculation has been performed successfully after a failure.

Normal calculation procedures have been performed successfully.

Failed to retrieve all <DATA TYPE> information for <POINT TYPE>.

This is an indication of bad telemetry. Communications between AVEVA Measurement Advisor and AVEVA Pipeline Operations for Gas are failing for some reason.

This indicates that there are input problems. Check the values entered in AVEVA Measurement Advisor as well as the Advanced Database Editor (ADE) to ensure that the device is looking for the correct information.