Available Symbols
- Last UpdatedOct 31, 2025
- 4 minute read
The default configuration features an extensive collection of pre-configured, standardized symbols for electrical, instrumentation, and process diagrams, as illustrated below.
|
Number |
Drawing Type |
Symbol Quantity |
|---|---|---|
|
1 |
Cable Block |
28 |
|
2 |
Control Loop |
24 |
|
3 |
Fieldbus |
6 |
|
4 |
Installation Details |
5 |
|
5 |
Instrument Hookup |
4 |
|
6 |
KeyOneLine (KOL/SLD) |
88 |
|
7 |
Lighting Plan |
8 |
|
8 |
Logic Diagram |
239 |
|
9 |
Process and Instrumentation Diagrams (P&ID) for 3.0mm grid Spacing |
659 |
|
10 |
Process and Instrumentation Diagrams (P&ID) for 2.5 mm grid Spacing |
659 |
|
11 |
Process Flow Diagram (PFD) for 3.0mm grid Spacing |
228 |
|
12 |
Process Flow Diagram (PFD) for 2.5mm grid Spacing |
228 |
|
13 |
Terminations |
11 |
|
Total Symbols |
2187 |
Cable Block Symbols
The default configuration contains 28 fully configured "AVEVA Default Standard" cable block symbols. Examples of the symbols are shown below.
Loops Drawing Symbols
The default configuration contains 24 fully configured "AVEVA Default Standard" Loops drawing symbols. Examples of the symbols are shown below.
Fieldbus Drawing Symbols
The default configuration contains six fully configured "AVEVA Default Standard" Fieldbus symbols. Examples of the symbols are shown below.
Installation Details Drawing Symbols
The default configuration contains five fully configured "AVEVA Default Standard" Installation Details drawing symbols. Below are examples of the symbols.
Instrument Hook-up Drawing Symbols
The default configuration contains four fully configured "AVEVA Default Standard" Instrument Hook-up drawing symbols. Below are examples of the symbols.
KeyOneLine (KOL/SLD) Drawing Symbols
The default configuration contains 88 fully configured "AVEVA Default Standard" KeyOneLine drawing symbols. Below are examples of the symbols.
Lighting Plan Drawing Symbols
The default configuration contains eight fully configured "AVEVA Default Standard" Lighting Plan drawing symbols. Below are examples of the symbols.
Logic Diagram Drawing Symbols
The default configuration includes 239 fully configured logic drawing symbols that comply with IEC, SAMA, and VGB standards. Below are examples of the symbols.
Process and Instrumentation Diagrams (P&ID) Symbols
The default configuration includes two sets of fully configured Process and Instrumentation Diagrams (P&ID) symbols that comply with ISO-10628 standards. Below are examples of the symbols.
-
Set-1 Process and Instrumentation Diagrams (P&ID) for 3.0mm grid Spacing (659 symbols)
-
Set-2 Process and Instrumentation Diagrams (P&ID) for 2.5mm grid Spacing (659 symbols)
Process Flow Diagram (PFD Symbols)
The default configuration includes two sets of fully configured Process Flow Diagram (PFD) symbols that comply with ISO-10628 standards. Below are examples of the symbols.
-
Set-1 Process Flow Diagram (PFD) for 3.0mm grid Spacing (228 symbols)
-
Set-2 Process Flow Diagram (PFD) for 2.5mm grid Spacing (228 symbols)
Terminations Symbols
The default configuration contains 11 fully configured “AVEVA Default Standard” Terminations drawing symbols. Below are examples of the symbols.
Drawing Templates
The default configuration contains four fully configured “AVEVA Default Standard” drawing templates for Loops, Hook-Up and Termination drawings.
-
Example of UE default configuration loop drawing template
Drawing Border
The default configuration includes pre-configured for the sheet sizes A0, A1, A2, A3, and A4, as shown in the following table.
|
No |
Drawing Border sheet |
Quantity |
|---|---|---|
|
1 |
A0 |
1 |
|
2 |
A1 |
6 |
|
3 |
A2 |
2 |
|
4 |
A3 |
6 |
|
5 |
A4 |
2 |
-
Sheet sizes
-
Example of A1 border
Symbol Legend
The default configuration includes symbol Legend for Process and Instrumentation Diagrams (P&ID) and Process Flow Diagram (PFD) symbols as shown below.
|
No |
Symbol Legend |
Quantity |
|---|---|---|
|
1 |
P&ID Legend |
8 |
|
2 |
PFD Legend |
8 |
-
Example of P&IDs Symbol Legend
-
Example of PFDs Symbol Legend
