Define connections
- Last UpdatedAug 06, 2026
- 1 minute read
Connections are defined by a source unit and a destination unit. If materials can move between two units, you must define the connection. The way in which materials move is not important at this stage.
Define connections
-
Select the Connections tab.
-
In the Name box, type Mix2Hld2.
-
Select Source Unit.
-
In the Select Source Unit dialog box, select Mixer2, and then select Apply.
-
Select Destination Unit.
-
In the Select Destination Unit dialog box, select Hold2, and then select Apply.
-
In the Connections tab dialog box, select Add.
Repeat steps 2-6 for the connections listed in the following table.
|
Connection |
Source Unit |
Destination Unit |
|---|---|---|
|
Blk1Mix2 |
Bulk1 |
Mixer2 |
|
Blk2Mix1 |
Bulk2 |
Mixer1 |
|
Blk2Mix2 |
Bulk2 |
Mixer2 |
|
Mix1Hld1 |
Mixer1 |
Hold1 |
|
Mix2Hld2 |
Mixer2 |
Hold2 |
The following image shows an example of the completed task.
