Enable latched state

You can enable the LATCHED state to view the LATCHED alarms in the Alarm Client Control grid. Alarms go to the LATCHED state if:

• You ACK an alarm from UNACK_RTN state.

  Or

• An Alarm Returns to Normal (RTN) from the ACK state.

Enable the latched state:

1. Open WindowMaker.

2. On the File menu, point to Configure, and then select Alarms.

   The Alarms configuration screen appears.

   

3. Select the Alarm Latch enabled checkbox to view the LATCHED alarms in the Alarm Client Control grid.

4. Select Save.