View platform status
- Last UpdatedJan 16, 2025
- 2 minute read
If you monitor the platform during its transition from a running state to a failed state, its status changes from Running On Scan or Running Off Scan to Shutdown - Failed. This indicates that the platform is in a shutdown mode and in a failed state.
If an event occurs that causes a platform to fail, then the status of that platform is Shutdown - Failed.
Note: A network failure between platforms is not a platform failure, but instead, the platform is not available.
To view platform status
-
Expand the console tree and select the Galaxy name. In the console tree, a list of all platforms deployed within the application appears under the Galaxy name.
The platform node name is listed in brackets after the platform name. A platform that is on the same node that Platform Manager is running on will have "local" appended to the node name. The platform name and node name also appear in the details pane.
-
In the details pane, locate the platform and view its status in the Platform Status column.
-
To set the order in which the platforms are displayed, select the Platform Name or Node Name column header.
The following table describes each column:
|
Column |
Description |
|---|---|
|
Platform Name |
The platform tag name. |
|
Node Name |
The computer name. |
|
Platform ID |
The platform’s identifier when it was instantiated from a template. |
|
Platform Status |
The current status of the platform. |
|
Operation Status |
The progress of the transition after a command is placed on the platform. This changes throughout the transition until the stable state is achieved. An empty column indicates a successful transition. |