PI Manual Logger Mobile Data Entry screen

The Data Entry screen shows the tag name and descriptor, tag value, timestamp, engineering units, and limits or zero/span, if configured. Depending on the Timestamp Tour Options settings, the default tag timestamp is set to either the tour's timestamp or the current timestamp, which is read from the mobile device clock.

Only limits that are configured for a tag are displayed below the Timestamp field where:

• LL = LoLo Limit

• L = Low Limit

• H = High Limit

• HH = HiHi Limit

• D = Delta Limit

If limits are not configured, then the Zero/Span attribute as defined for the point in PI Data Archive is displayed.

Navigation tools

Depending on how tour options are configured, the navigation tools in the tour run Data Entry screen may display:

• Only the tags that are due for collection.

• If you need to see a tag that is not due, tap the Group tab, select the tag, and tap Go.

• To navigate to the next tag that is due, select Go > Go to Next Empty Tag, or tap .

• All tags, whether they are due or not.

  The following navigation tools are available.

  Tool	Description
  	Go to the first tag in the sequence.
  	Go to the previous tag in the sequence.
  	Go to the next tag in the sequence.
  	Go to the last tag in the sequence.

Tag status indicators

The tag status indicators in the Data Entry screen are:

Tour run toolbar

The tour run toolbar is divided into two groups of functions, one for tags and the other for tours.

Tag tools

Tour tools