Use cursor statistics
- Last UpdatedNov 17, 2026
- 4 minute read
Cursor statistics can be enabled in the Ad Hoc Workspace and in pop-up trends. They provide summarized statistical information about the data that occurred over a selected period of time, and they also let you check how much time elapsed between two selected points on the trend.
When you enable cursor statistics, two trend cursors appear on the trend to mark a start time and end time. You can drag the trend cursors to different points on the timeline to change the period of time for which statistics are calculated. Over the selected period of time, a statistics table provides the average value, minimum value, maximum value, and a delta calculation for each trend line.
Also, with cursor statistics enabled, the duration of time between the two trend cursors is displayed. So, you can use the cursors to quickly measure time durations on the trend for any reason. For example, if a trend line reflects a period of unusually low flow rates for a pump, you could place a trend cursor at the beginning and end of that period to measure the duration of time that flow rates were low.
Enable and disable cursor statistics
-
Open the Ad Hoc Workspace or a pop-up trend.
Note: There must be at least one trend line present before you can enable cursor statistics. If you are working in the Ad Hoc Workspace, one or more trend lines may automatically appear or you may need to add data items to populate trend lines, depending on how you opened the workspace.
-
Select Enable Cursor Statistics
.
-
To change the period of time for which statistics are provided, select and drag the start time trend cursor or end time trend cursor to the desired point on the timeline.
Note: To move a trend cursor, you can also select a trend cursor then use the left and right arrow keys on your keyboard. To move the trend cursor in greater increments, hold down the Ctrl key before using the arrow keys.
-
To disable cursor statistics, select Disable Cursor Statistics
.
Understand cursor statistics
This section highlights all of the features of cursor statistics. While the image below shows the Ad Hoc Workspace, the features are identical in pop-up trends.

-
Enable/Disable Cursors Statistics - The icon to enable and disable cursor statistics. It appears orange when cursor statistics are enabled and blue when they are disabled.
-
Start time trend cursor - The trend cursor that marks the start time. You can drag this cursor to a different point on the timeline to change the period of time for which statistics are provided.
-
End time trend cursor - The trend cursor that marks the end time. You can drag this cursor to a different point on the timeline to change the period of time for which statistics are provided.
-
Duration - The duration of time between the two trend cursors. If you move either trend cursor, the duration automatically updates.
-
Statistics columns - Table columns that provide statistics for the selected period of time. In the table, rows provide separate statistics for each trend line. If you move either trend cursor, the statistics automatically update. The information that is provided in each column is described below.
|
Column Name |
Description |
|---|---|
|
Average |
The trend line's average value over the selected period of time. |
|
Minimum |
The trend line's lowest value over the selected period of time. |
|
Maximum |
The trend line's highest value over the selected period of time. |
|
Delta |
The difference between the trend line's start value and end value for the selected period of time. A positive number is shown if the value ended higher than it started. A negative number is shown if the value ended lower than it started. No Data appears in the column if, for the selected period of time, the trend line contains any data with a bad data quality (IsGood=false). Data with a bad data quality is indicated by a break in the trend line. |