Please ensure Javascript is enabled for purposes of website accessibility
Powered by Zoomin Software. For more details please contactZoomin

AVEVA™ Instrumentation

TABLE OF CONTENTS

Cable Gland Catalog

Save PDF
Save selected topicSave selected topic and subtopicsSave all topics
Share
Share to emailCopy topic URL
  • Last UpdatedNov 13, 2025
  • 2 minute read

The Cable Gland Catalog is used to view and edit all catalog Cable Glands and allows definition of manufacturers gland properties such as catalog number, manufacturer, material, thread, minimum and maximum size, whether suitable for armoured cables .

  1. To open the Cable Gland Catalog, click Select in the Grids and Schedules section of the Home tab.

  2. Select Cable Glands from the list of grids that is then displayed.

    The Cable Gland Catalog grid is then displayed:

    Note: Only those cable glands with their Allow column checkbox checked will be available for use when working in the project. Although the cable gland catalog can hold thousands of standard glands from various manufacturers, 'Allow' filters only specific glands for use on the project.

    For information on Grid functionality refer to Working with the Data Grid.

  3. To create a new catalog cable gland, open the Cable Gland Catalog grid and click New from the Records section of the Home tab.

    The Cable Gland Detail window is then displayed:

  4. Enter the required details are click OK or Apply.

  5. Make sure the Allow use on Project checkbox is checked if the gland is to be available for selection in the project.

    The Share the Cable Gland Details with AVEVA Electrical checkbox is used to specify whether or not the catalog cable gland is to be shared with AVEVA Electrical.

    Notes: Unless sharing with AVEVA Electrical is enabled for the project the checkbox will be disabled. Sharing with AVEVA Electrical may be enabled during project setup, or afterwards (using the Project tab > Edit Project option). Refer to Installation for further information.

    Cable glands can also be imported from Excel. For a description of this functionality, refer to Common Functionality of AVEVA Instrumentation.

  6. To edit cable gland details, open the Cable Gland Catalog grid, select the gland record from the grid and either click Edit from the Records section of the Home tab, or double-click on the record.

    The Cable Gland Detail window is then displayed. Edit the details are required.

TitleResults for “How to create a CRG?”Also Available in