Change Terminal Marking

To change a terminal marking enter a new value in the Terminal Marking field and click Save.

If multiple terminals were selected in the Terminations window, then selecting the Apply New Sequence to all following Terminals checkbox will re-number the selected terminals sequentially from the entered for terminal marking. This feature only works if the new terminal marking is numeric.

Note: If using the {SignalNo-NoPolarity} datalink as part of the Automatic Ferrule Numbering facility, make sure to use the signal number/polarity break character as specified in on the General Tab of the Options window. That is, enter it before the actual terminal marking in the Terminal Marking field.