Editing SRC2 Using the DEW
- Last UpdatedMar 10, 2020
- 1 minute read
-
In the Tank Level Control window, right-click SRC2 and select Data Entry.
-
In the SRC2 DEW dialog box, under the Basic tab, modify the parameters listed below and click Apply.
Pressure
102.32 kPa
Temperature
395 K
Air
1 kg-mol
Relative Elevation
5 m
-
Navigate to the Thermo tab. Under Phase Options / Internal phases, select Vapor Liquid and click Apply. A blue check mark should appear next to the Thermo tab.
-
Click OK to close the SRC2 DEW.