Foxboro FoxView HMI machine

This workstation has Foxboro Evo Control Core Services and FoxView installed. In this role, SCP software provides simulation components for FoxView and the Alarm Subsystem on this machine. SCP software also provides an optional FAIM historian. This is a typical Operator Training Simulation application for a system that uses the FoxView HMI. This machine is connected to the FECN (formerly MESH) network and the simulation network.

NOTE: FAIM and AIM* Historians cannot exist on the same machine. Uninstall AIM* before installing SCP.

NOTE: This workstation cannot have Foxboro Evo Control Software installed.

The FoxView HMI machine requires the installation of these components in the following order:

1. If the machine will be used as a domain client, commit it with a system definition - System Definition: A Step by Step Procedure (B0193WQ). This installs I/A Series or Control Core Services. Refer to the section Foxboro Evo Software Installation Overview for more details about specific versions or I/A Series or Control Core Services.

2. Install FoxView / FoxDraw 10.5.1.

3. Disable I/A Series or Control Core Services, disable virus scanner, and reboot prior to installing SCP Software.

4. Disconnect from the company LAN or Internet (critical).

5. Install DYNSIM Activation Manager.

6. Install SCP 3.1 Software (see this document: Installing SCP on Foxboro FoxView HMI machine.

7. Re-enable virus checking software.

8. Re-enable I/A Series / Control Core Services processes and reboot.

A special variant of the Foxboro FoxView HMI machine is called the "Single Box" This is machine has Control Core Services, FoxView, SCP (all components including SCP Apps), and Dynsim on one machine. The installation procedure for this variant is covered in Appendix A – Single Box Solution.