Post Installation Steps for Single Box Setup

1. Open the properties of the NIC selected earlier (#2 in our example), de-select the IA Virtual Switch Protocol, and select the REDL Mux-Intermediate Driver as shown below and click OK.

   

2. Turn on I/A, and then reboot the system.

3. Once the system restarts, open the network adapter settings from Control Panel and select the network adapter with the device name REDL Virtual Miniport Driver as shown below.

4. Select I/A Virtual Switch protocol in the properties as shown below and click OK.

5. Once the network properties are set as described above, reboot the system. Once the system restarts, single box installation of SCP is complete.

6. The properly set network adapters properties will be as follows:

   

   Local Area Connection 7 is the non-I/A network adapter connection to other networks or the internet.

   

   

For more details on setting up an I/A machine, see the I/A Virtualization Guide B700VM and SCP Virtualization User Guide documents.