Assign data log groups to an operation

You can assign one or more data log groups to an operation to allow users to collect measurement data about production. For information about adding and managing data log groups, see Data logger.

When assigning a data log group to an operation, you can configure the group to acquire periodic data. You can also assign an audit certification to a data log group to require one or more qualified users to sign off on the data being logged.

Assign data log groups to an operation

1. Select the operation.

2. In the Properties window, open the Data Log Groups section.

   

3. Click the Edit button.

   The Data Log Group dialog box appears.

   

4. Right-click in the Data Log Group dialog box, and then click Add.

   The Add Data Log Groups dialog box appears. Available data log groups are listed. Groups that have been previously assigned to the operation are already selected.

   

5. Select the groups to be assigned to the operation and click OK.

   The selected groups are listed on the Data Log Group dialog box.

   

6. For each group, complete the property settings.

   Periodic Data Collection

   Specifies whether periodic updates of data are enabled. If selected, data is collected periodically at the trigger period that is defined.

   Trigger Type

   Available only if the Periodic Data Collection check box is selected.

   The trigger type for periodic data collection. Select whether the collection period is in minutes or hours (hourly).

   Trigger Detail

   Available only if the Periodic Data Collection check box is selected.

   The number of minutes or hours to wait between each periodic data collection operation.

   Data Confirmation Required

   Specifies whether data collection requires a certification for sign-off.

   Certification

   Available only if the Data Confirmation Required option is selected. Select the audit certification for the data log group.

   If an audit certification is selected here, then one or more qualified users will be required to sign off to complete the data logging.

7. Click Close to close the Data Log Group dialog box.

   The selected groups are listed on the Data Log Groups property group.

   

8. Save the changes.

Edit data log group properties

9. Click the Edit button to open the Data Log Group dialog box.

10. Modify any of the group properties as needed, then click Close.

11. Save the changes.

Remove a data log group from the operation

12. Click the Edit button to open the Data Log Group dialog box.

13. Right-click the group and click Delete.

    You are prompted to confirm the deletion.

14. Click Yes.

15. Click Close to close the Data Log Group dialog box.

16. Save the changes.