Modify the display order of cause groups and causes
- Last UpdatedOct 28, 2024
- 1 minute read
In the Cause tab, the order of the cause groups and the causes in a cause group is the order that will be presented to an SPC chart user when they assign a cause to a characteristic sample. You can rearrange the order of the cause groups or causes by using drag‑and‑drop or cut‑and‑paste.
Rearrange the order of cause groups or of a cause in a group using drag-and-drop
-
Click and drag the cause group or cause to the new location in the hierarchy.
Move one or more causes from one cause group to another using cut-and-paste
-
Select the causes.
-
On the ribbon, go to the Home tab and click Cut.
-
Select the destination cause group.
-
On the ribbon, go to the Home tab and click Paste.
The causes are added at the bottom of the target cause group.
The moving of a cause behaves as follows:
-
If the cause is pasted to or dropped on a cause higher in the list of causes within the same group, the moved cause is placed above the target cause.
-
If the cause is pasted to or dropped on a cause lower in the list of causes within the same group, the moved cause is placed below the target cause.
-
If the cause is pasted to or dropped on a cause in a different cause group, the moved cause is placed above the target cause.
-
If the cause is pasted to or dropped on a different cause group, the moved cause is placed at the bottom of the target cause group.