Device-specific Parameters
- Last UpdatedFeb 02, 2023
- 1 minute read
|
|
|
UNINTENDED EQUIPMENT OPERATION Do not change these protocol parameters, except on the advice of Technical Support for this product. Failure to follow these instructions can result in death, serious injury, or equipment damage. |
Note: Always seek the advice of Technical Support personnel for this product regarding undocumented features.
Any parameters placed under the [OPCUA] section of the Citect.ini file will apply globally to every device using the OPCUA driver. However, you can also set parameters for a specific device, or for every device connected to a specified port.
To do this, use one of the following section names within the Citect.ini file.
-
[<Protocol>.<PortName>]
where: <Protocol> is OPCUA and <PortName> is the 'Port Name' defined for a specified port on the Ports form.
For example, any parameters set within the section [OPCUA.PrimaryPort1] will impact every device connected to the port defined as "PrimaryPort1" on the Ports Form.
-
[<Protocol>.<PortName>.<DeviceName>]
where: <Protocol> is OPCUA, <PortName> is the 'Port Name' defined for a specified port on the Ports form and <DeviceName>.
For example, any parameters set within the section [OPCUA.PrimaryPort1.PrimaryIODev128] will only impact the device named "PrimaryIODev128".