Limit Label Genie
- Last UpdatedJul 18, 2023
- 2 minute read
Genie Name:limitlabel_<n>
Genie Library: sa_faceplate
System Project: SA_Library
The Limit Label Genie allows you to add a label to a limit indicator on a faceplate.
It can display alarming limits, or the practical engineering range.
Practical engineering range:
-
EH = engineering high.
-
PH = practical high.
-
PL = practical low.
-
EL = engineering low.
Alarming limits:
-
HH = high high alarm.
-
HI = high alarm.
-
LO = low alarm.
-
LL = low low alarm.
Two variations of the Genie are included in the SA_Library project:
-
limitlabel_12
-
limitlabel_15
Genie Properties
Complete the following properties for the Genie in the Genie Properties dialog box.
-
AN: This is an automatically-generated unique ID for the Genie object.
-
Name: Optional. If you need to reference the Genie at runtime using Cicode, specify a unique name.
Genie Parameters
Select the Genie and double-click on it to view its parameters. The parameters are used as described in the table below:
|
Parameter |
Description |
|---|---|
|
Equipment Context |
An equipment name that is used to define equipment context, or a Super Genie association that defines equipment context. By default, the following is used: ?__EquipmentRef? This specifies that the current workspace context is used. |
|
Item Prefix |
Enter the equipment item prefix you want the Genie to access. |
|
Limit Index |
Enter the value that indicates the limit index you would like the label to use. You can enter one of the following values, or one of the pre-defined labels included in the SA_Library system project.
Note: If you want to use PLC limits, you can add additional labels that correspond to those configured by the [SA_Library.Meter]PLCLimitNames parameter. See Associate PLC Limits with Equipment. |