[Alarm]DBLogServerCore
- Last UpdatedJul 19, 2023
- 1 minute read
Use this parameter to enable logging for the analysis of redundancy and synchronization issues.
Note: This parameter can also be applied to a specific cluster or alarm server process. For more information, see Configure Alarm Parameters for a Specific Cluster or Process.
Allowable Values:
An integer representing one of the following logging masks, or the sum total of integers representing multiple logging masks:
|
Logging Mask |
Description |
Integer |
|---|---|---|
|
DBERR |
Server errors |
1 |
|
DBSTD |
Server state management |
2 |
|
DBTRN |
Server transaction |
4 |
|
DBDRV |
Server driver control |
8 |
|
DBADV |
Server advise links |
16 |
|
DBSVR |
Server and threads |
256 |
|
DBSLT |
Standby links |
512 |
|
DBSCX |
Links |
1024 |
|
DBDA |
OPC DA links |
2048 |
|
DBHDA |
OPC HDA links |
4096 |
|
DBAE |
OPC AE links |
8192 |
|
DBMAN |
Manager links |
16384 |
|
DBDIA |
Diagnostic links |
32768 |
|
DBLRW |
Link read-write |
524288 |
|
SBXFR |
Standby transfer |
16777216 |
|
SBDAT |
Standby transfer data |
33554432 |
|
SBPOL |
Standby polls |
67108864 |
|
SBPEX |
Standby poll details |
134217728 |
|
DBSLR |
Server link reference counting |
536870912 |
Default Value:
0 (logging is not enabled)
Example
To enable logging of server errors (set using "1") and server transactions (set using "4"), you would add the integers for each and set the parameter to the following:
[Alarm]DBLogServerCore=5