[Debug]DriverTraceElements
- Last UpdatedJul 19, 2023
- 1 minute read
|
|
|
UNINTENDED EQUIPMENT OPERATION Do not change the [Debug]DriverTraceElements parameter in the Citect.ini file, except on the advice of Technical Support for this product. Failure to follow these instructions can result in death, serious injury, or equipment damage. |
Defines the maximum number of data buffer elements to be displayed in a driver trace. This parameter can be used to limit the printouts for drivers with large blocking values. For example if 128 are read, and parameter is set to 10 then 10 are displayed. If 5 are being read, then only 5 are displayed.
Allowable Values:
1 to 256
Default Value:
256