Allen-Bradley SLC-500 via Data Highway - Device Address

The address for an Allen-Bradley SLC-500 connected to a KT (or KTX, KTXD, or 5136-SD) board is specified as:

xKT:C[options],u

Where:

• x = the board number. If the number is not specified in the ports for then use 1.

• C = the channel number, for example, KT card = 0, KTX card = 0 or 1.

• u = the station number of the remote PLC in octal. Station numbers are between 0 and 77 (octal) for DH+ channels, and between 1 and 376 (octal) for DH channels.

• [options] If required, you can use the Offlink Address options to allow communication with a station (PLC) that is not on the local link.

Example

1KT:0,1 specifies Port ID 1KT for access to PLC Station 1 .