Reducer Configuration Category

The Reducer Configuration Category consists of the Settings sub-category:

From the Reducer Label Format list, select the direction in which reducer labels are to be orientated: Flow Direction, Largest size first, Smallest size first or Left to Right.

If "Flow Direction" is selected, the first part of the label (i.e. the first diameter) is positioned on the upstream side of the reducer and the second part of the label on the downstream side of the reducer, e.g.:

If "Largest size first" is selected, the first part of the label is placed on the wider side of the reducer, the second part on the narrower side:

If "Smallest size first" is selected, the first part of the label is placed on the narrower side of the reducer, the second part on the wider side:

Note: In order for this functionality to work correctly, the list of values for sizes used on the project (Metric Sizes or Imperial Sizes) must set up sorted from smallest size to largest size. Lists of values are set up using the List of Values Configuration Category.

If "Left to Right" is selected, the labels will be displayed with the size of the left-hand side of the reducer followed by the size of the right-hand side of the reducer, irrespective of the flow direction of the line, for example, "left side size" x "right side size".

In the case of vertical lines, the left-hand size is displayed below the right-hand size.

In the Reducer Delimiter field, enter the character that is to be displayed as the default delimiter between the two reducer sizes on drawings, for example, x or /. Select from the drop-down list to define the user list of values which contains all of the delimiters that are available for selection in the Properties dialog. The default user list of values is USERLOV_Delimiters which is setup using the List of Values Configuration Category.