Add Loads to Phase Ways

To add a load to a phase way:

1. Select it and click Assign Load. The Assign Load (Drag & Drop) window is then displayed:

   

2. Select one of the distribution board’s output voltages from the Output Voltage list. The output voltages for a distribution board are viewed and specified using the Output Voltages tab.

3. The windows then lists the available loads (including supplies that may be loads) with voltages matching the selected output voltage.

4. Select the required load by dragging and dropping it from the window onto a phase. If the load can be added to a phase, the phase is highlighted in a gold colour when the cursor is dragged over it. For example:

   

5. The load is the added to the view and the load balance figure is automatically updated. For example:

   

6. When a load is assigned to a phase way when the Circuit Number circuit identification method is in use, the word "SPARE" is removed from it.

   

   Note:
   Loads may also be assigned from the list of circuits in the Loads sub-tab. Refer to Loads Tab (Loads Assigned Tab - Distribution Boards).