Terminals Pop-up Menu

Change Terminal
Marking

Displays the Change Terminal Marking window (see Change Terminal Markings and Labels), used to change the terminal marking (and to edit wire numbers attached to the terminal, if any).

Swap Left & Right Connections

Swaps all wires on left with wires on right for selected terminals.

Disconnect

Disconnects all wires on selected terminals (either on the left side only, tight side only or both sides depending on the sub-menu option selected). See Disconnect or Delete Wires and Cores.

Set Terminal Type

Sets the terminal type to either 'Standard' (default), 'Disconnect' or 'Fused' depending on sub-menu option selected.

Note:
The terminal graphic representation changes to show the selected terminal type. This same graphic is used when Electrical Wiring Manager creates termination reports and when Electrical Designer generates a CAD drawing.

Set Terminal Reservation

Used to set the left, right or both sides of the selected terminal as "reserved", depending on the sub-menu option selected. A sub-menu option is also available to undo the reservation. Refer to Set Terminals as Reserved or Spare.

Set Spare Terminals

Used to set the left, right or both sides of the selected terminal as "spare", depending on the sub-menu option selected. A sub-menu option is also available to undo this setting. Refer to Set Terminals as Reserved or Spare.

Split Terminal Strip

Splits selected terminals out of current strip into a new one. This retains all connections on both sides.

Delete Terminals

Enables selected terminals to be deleted, disconnecting any terminations as well.

Select All

Selects all terminals in the terminal's terminal strip.

Select By

Used to select every second, third or fourth terminal, depending on the sub-menu option selected.

DeSelect All

De-selects all terminals in terminal's terminal strip.

Change Terminal Marking

Displays the Change Terminal Marking window (see Change Terminal Markings and Labels), used to change the terminal marking (and to edit wire numbers attached to the terminal, if any).

Disconnect from Selected

Disconnects wires from the selected terminal.

Disconnect All Selected

Disconnects wires from all selected terminals.

Select All Terminals

Selects all the device’s terminals.

Select By

Used to select every second, third or fourth terminal, depending on the sub-menu option selected.

DeSelect All Terminals

De-selects all terminals in the terminal's terminal strip.

Edit Signal No.

Opens the Change Terminal Marking window, in which the signal number may be edited. Refer to Change Terminal Markings and Labels.

Split Earth Bar/
Split Terminal Strip

Used to split the currently selected terminals off the Earth Bar or Terminal Strip to create a new Earth Bar or Terminal Strip.