Cable Gland Adapter Catalogue

The Cable Gland Adapter Catalogue is used to view and edit all catalogue Cable Gland Adapters and allows definition of manufacturers adapter properties such as catalogue number, thread, material etc.

To open the Cable Gland Adapter Catalogue, click Select in the Grids and Schedules section of the Home tab.

Select Cable Gland Adapters from the list of grids that is then displayed. The Cable Gland Adapter Catalogue grid is then displayed:

Note:
Only those cable gland adapters with their Allow column checkbox will be available for use when working in the project. Although the cable gland adapter catalogue can hold thousands of standard adapters from various manufacturers, 'Allow' filters only specific adapters for use on the project.

For information on Grid functionality refer to Working with the Data Grid.

Create a New Cable Gland Adapter

To create a new catalogue cable gland adapter:

1. Open the Cable Gland Adapter Catalogue grid and click New from the Records section of the Home tab.

2. The Gland Adapter Detail window is then displayed:

   

3. Enter the required details are click OK or Apply.

4. Make sure the Allow use on Project checkbox is checked if the gland adapter is to be available for selection in the project.

5. The Share the Cable Gland Adapter with AVEVA Instrumentation checkbox is used to specify whether or not the catalogue cable gland adapter is to be shared with AVEVA Instrumentation.

   Note:
   Unless sharing with AVEVA Instrumentation is enabled for the project the checkbox will be disabled. Sharing with AVEVA Instrumentation may be enabled during project setup, or afterwards (using the Project tab > Edit Project option). Refer to the Installation User Guide for further information.

   Note:
   Cable gland adapters can also be imported from Excel. For a description of this functionality, refer to the Common Functionality User Guide.

Edit a Cable Gland Adapter

To edit cable gland adapter details, open the Cable Gland Adapter Catalogue grid, select the adapter record from the grid and either click Edit from the Records section of the Home tab, or double-click on the record.

The Gland Adapter Detail window is then displayed. Edit the details are required.