View OEE analysis details for a piece of equipment or production line

You can drill down into each chart to view additional OEE analysis data about a piece of equipment or production line.

To view analysis details

1. Select the equipment or production line bar in any of the charts.

   

2. Select the icon.

The Summary tab shows percentages for each OEE measure over the selected time period. Below these is a time chart that shows the percentages for the selected measure distributed across the time period.

For a piece of equipment, the Details tab lists sets of OEE data for the piece of equipment during the selected time period. For a production line, the Details tab lists sets of OEE data for all of the line's bottleneck and production source equipment.

Note: Formats, such as the use of commas or periods in numbers, follow your browser's locale or language setting.

3. Go back icon

   Go back to the summary view of the OEE analysis data.

4. Location and equipment or production line name

5. Time range of the currently selected time period

6. The percentages for all OEE measures for the selected time period

7. The measure's percentages across the selected time period

   • The duration of the time slots in the chart depends on which time period setting is used to filter the OEE data.

   • In the Performance and Quality details, if all production runs for the selected time period have the same unit of measure, that UOM is displayed. Otherwise, the generic units UOM is displayed.

8. Available time periods by which to filter the OEE analysis data

   The default time period is the one selected on the summary page. Changing the time period here does not affect the time period on the summary page.

9. List of OEE data for given time periods

   Each row represents a set of OEE data for a given time period. A new time period starts every hour, whenever a production run starts or ends, or whenever an OEE data property value changes.

   Each event row includes the following standard columns: Start and End Time, the OEE measure's percentages, and Production Run.

   For a production line, the following standard columns are included: Namespace and Name for the piece of equipment and the equipment Type (Bottleneck, Production Source, or Both).

   

   Other columns are included based on the measure whose data is being displayed. If the equipment has shifts assigned, then there will be a Shift column with data. If OEE data properties are being used, they are appended to the data row.

   Depending on the OEE KPI selected, each event row includes the following columns:

   • Availability: Runtime Duration, Downtime Duration, Idle Duration, Runtime Count, Downtime Count, Idle Count

   • Performance: Good Count, Waste Count, Rate Quantity, Rate UOM, Rate Time, Production Rate

   • Quality: Good Count, Waste Count

   • OEE: All of the above

   For how to group, filter, and sort the grid content, see Work with the details grid.

10. Maximize the grid within the browser window

11. Navigation controls for other pages of utilization events

12. Share icon (to export OEE data)

    From this menu you can export the OEE data in the selected time period to a CSV file. See Export details grid data to a CSV file.

View bar information

To view the time range and value for a bar in the chart

• Select the bar.

  

Available Time Periods by Which to Filter the Detail Data

You can change the time period for the detail data from the default time period, which is the one selected on the summary page. Changing the time period here does not affect the time period on the summary page.

• If the time period is more than 7 days, the start time is adjusted to midnight of your local time.

• If the time period includes a Daylight Savings time switch, all of the bars might not start at midnight local time.

• Custom time ranges on OEE Analysis pages can exceed 31 days.

For more information about setting time periods, see Define a time range.