Production Summary Chart

The following properties are available for the Production Summary Chart:

• Asset - Sets the piece of equipment to chart. To show data, OEE calculations must be enabled for the selected asset and there must be at least one production disposition reason defined in the efficiency model.

  You can search for assets by name, by filter, or both.

  • To search by asset name, enter a value in the Asset field.

  • To apply filters, select the Asset field, then select to view and select filters. Select to accept your selected filters and return to the previous search panel.

  • Select an asset from the search results to add it.

• Use shared entity - This property is available if this visual is added to a dashboard. If this is enabled, the source is set to the shared entity used by the dashboard. For details, see Configure a dashboard to allow shared entity selection.

• Disposition Reasons - Specifies which disposition reason categories to include in the chart. Select from:

  • Good

  • Waste

• Number of Top Reasons - Sets the maximum number of disposition reasons to include in the chart, sorted by the most occurrences.

From the summary chart, users who have permission to create and edit production events can add, edit, and reclassify production for events that have occurred during the current or previous production run.

Note the following about performing any of these actions:

• If there is a current production run, the unit of measure comes from the production run. Otherwise, the unit of measure is the one assigned to the piece of equipment.

• The action date and time default to the current time or, if the chart's selected time period is past, to the end time of that time period.

• The date and time must be within the selected time period of the chart data. It should also be within the time period of the current or previous production run. If the entered date and time is outside of the current or previous production run, the action will not fail but the event will not be associated with any production runs.

Add production

You can add good or waste production, depending on the Disposition Reasons setting for the chart.

1. Select the Add icon.

   

   The Add dialog appears.

   

2. Enter the production quantity.

   You can enter a value up to 15 digits. Only positive values are allowed.

3. If needed, change the production date and time.

4. Select a production reason.

   Production reasons are used to describe the disposition reason for the production. For example, Good Production if it was normal good production, or Rework Production if the production was bad production that had to be reworked to make it good production.

5. Select Add.

   The good or waste production count for the selected disposition reason is incremented.

Edit a production count

You can edit the production count that applies to a disposition reason that appears in the chart.

6. In the chart, select the chart bar of the disposition reason.

7. Select the Edit icon that appears.

   

   The Edit dialog appears.

   

8. Enter the quantity and select whether to increase or decrease the count by the value entered.

   You can enter a value up to 15 digits.

   When decreasing the count, the adjust quantity can't be more than the current quantity.

9. If needed, change the production date and time.

10. Optionally, enter a comment to explain why the quantity was changed.

11. Select Save.

Reclassify production

You can reclassify production from one disposition reason that appears in the chart to another reason.

12. In the chart, select the chart bar of disposition reason to be changed.

13. Select the Reclassify icon that appears.

    

    The Reclassify dialog appears.

    

14. Enter the quantity to be reclassified (up to the current quantity), select Good or Waste, and select the new disposition reason.

15. If needed, change the production date and time.

16. Optionally, enter a comment to explain why the quantity was reclassified.

17. Select Reclassify.