Modify Hull View

Annotation scale

Input a value in the field to modify the scale of annotations. The default is 1:50.

Hull Content

Select Outline from the drop down list to display an outline view of the hull.

Select Detailed from the drop down list to display a detailed view of the hull.

Limits

Depth before

Input a value in the field to define the elements that display in the view, measured from the cross section location. All elements that are positioned within the depth value display in the hull view. The default is 100mm.

Depth behind

Input a value in the field to define the elements that display in the view, measured from the cross section location. All elements that are positioned within the depth value display in the hull view. The default is 100mm.

X min

Input a value in the field to modify the minimum limits of the view along the X axis.

Y min

Input a value in the field to modify the minimum limits of the view along the Y axis.

Z min

Input a value in the field to modify the minimum limits of the view along the Y axis.

X max

Input a value in the field to modify the maximum limits of the view along the X axis.

Y max

Input a value in the field to modify the maximum limits of the view along the Y axis.

Z max

Input a value in the field to modify the maximum limits of the view along the Y axis.

Location

Direction

Select X from the drop-down list to modify the view direction to forward.

Select -X from the drop-down list to modify the view direction to aft.

Face no

If the hull view location is an RSO face, the Face no property displays. Input a value in the field to modify the Face no.

Plane

Input a value in the field to modify the cross-section view location.

Outfitting Content

Cableway

Select Yes from the drop-down list to display cableway elements in the view.

Select No from the drop-down list to remove cableway elements from the view.

Equipment

Select Yes from the drop-down list to display equipment elements in the view.

Select No from the drop-down list to remove equipment elements from the view.

Pipe

Select Yes from the drop-down list to display piping elements in the view.

Select No from the drop-down list to remove piping elements from the view.

Room design

Select Yes from the drop-down list to display room design elements in the view.

Select No from the drop-down list to remove room design elements from the view.

Structure

Select Yes from the drop-down list to display structural elements in the view.

Select No from the drop-down list to remove structural elements from the view.

Ventilation

Select Yes from the drop-down list to display HVAC elements in the view.

Select No from the drop-down list to remove HVAC elements from the view.

Show RSO

Select Yes from the drop-down list to display reference surface objects in the view.

Select No from the drop-down list to remove reference surface objects from the view.