Chamfer Multiple Objects

Applies a chamfer to a number of selected objects.

1. You are prompted to Select option: <Select object>

2. Input M at the prompt and press Enter.

3. You are then prompted to Select option: <Select object>

4. Input S at the prompt and press Enter.

5. You are then prompted to Select first object

6. Click to identify the first object.

7. You are then prompted to Select second line

8. Click to identify the second object. The chamfer is created.

9. You are then prompted to Select option: <Select object>

10. You can continue to fillet objects.

11. Input F at the prompt and press Enter to end the command.

12. Throughout the chamfer process you can press ESC to cancel the command. Additional functionality is also available.

    Select object	Press the down arrow key and select Select object to select an object and begin the chamfer process.
    Distance	Press the down arrow key and select Distance to set the chamfer distance. Refer to Set Chamfer Distance for further information.
    Angle	Press the down arrow key and select Angle to set the chamfer angle. Refer to Set Chamfer Angle for further information.
    Trim	Press the down arrow key and select Trim to turn trimming on or off. Refer to Turn Trim On/Off for further information.
    Method	Press the down arrow key and select Method to select the chamfer method. Refer to Select Chamfer Method for further information.
    Finish	Press the down arrow key and select Finish to end the command.