Select Chamfer Method
- Last UpdatedAug 06, 2026
- 1 minute read
Sets the default chamfer method.
-
You are prompted to Select option: <Select object>
-
Input E at the prompt and press Enter.
-
You are then prompted to Select option <Distance / Angle>
-
Input D at the prompt or press the down arrow key and select Distance to set the chamfer method as distance.
-
Alternatively, input A at the prompt or press the down arrow key and select Angle to set the chamfer method as angle.
-
You can continue to chamfer objects. Refer to Chamfer Objects or Chamfer Multiple Objects for further information.