Modify Straight Wall
- Last UpdatedJun 11, 2025
- 2 minute read
Modifies the position, length and direction of a straight wall.
By default the Start position of the current element displays as East, North and Up co-ordinates with respect to the world.
The Start position is indicated in the 3D view.
The Position options allow you to specify the point on the element to which the position co-ordinates apply. You can specify Start, End or Centre from the drop-down list.
Dependant on the option specified, modification of co-ordinates has an effect on the CE:
|
Start |
Relocates the start position of the element to the specified co-ordinates, and leaves its end position unchanged. |
|
End |
Relocates the end position of the element to the specified co-ordinates, and leaves its start position unchanged. |
|
Centre |
Relocates the entire element, locates its centre at the specified co-ordinates and modifies the start and end positions. |
To define a position by reference to design items that already exist, use the Positioning Control window and the cursor to identify the required position using a cursor pick in the 3D view. Refer to Positioning Control for further information.
The Settings option allows you to change the length and direction of the wall.
The End Direction option allows you to change the end direction to Perpendicular or you can Maintain the original direction.
Click OK to apply the changes or click Cancel to discard any inputs and close the Modify STWALL window.