Please ensure Javascript is enabled for purposes of website accessibility
Powered by Zoomin Software. For more details please contactZoomin

Everything E3D

TABLE OF CONTENTS

Create Ring Panel with Specified Centre Point

Save PDF
Save selected topicSave selected topic and subtopicsSave all topics
Share
Share to emailCopy topic URL
  • Last UpdatedFeb 12, 2026
  • 3 minute read

Creates a ring panel with a specified centre point.

  1. You are prompted to Centre point or

  2. Input values in the dimension fields and press Enter or click to identify the centre point position.

  3. You are then prompted to Outer diameter (Thk: #mm, Just: #) or <Radius>.

  4. Input a dimensional value in the field and press Enter or click to identify the diameter of the ring panel.

  5. You are then prompted to Panel width (Thk: #mm, Just: #) or.

  6. Input a dimensional value in the field and press Enter or click to identify the width of the ring panel. An ring panel is created and displays in the 3D view.

  7. Throughout the panel creation process you can press ESC to cancel the command. Additional functionality is also available.

    Three point

    Press the down arrow key and select Three point to create a ring panel with three specified points. Refer to Create Ring Panel with Three Specified Points for further information.

    Two point

    Press the down arrow key and select Two point to create a ring panel with two specified points. Refer to Create Ring Panel with Two Specified Points for further information.

    Radius

    Press the down arrow key and select Radius to create a ring panel with a outer radius.

    You are prompted to Outer radius (Thk: #mm, Just: #) or <Diameter>

    Input a dimensional value in the field and press Enter to set the radii of the ring panel.

    Justification

    Press the down arrow key and select Justification to define the justification position of the panel.

    Input a justification value in the field and press Enter or press the down arrow key and select a justification value.

    Back

    Press the down arrow key and select Back to undo the last action.

    Diameter

    Press the down arrow key and select Diameter to create a ring panel with a fixed outer diameter.

    You are prompted to Outer diameter (Thk: #mm, Just: #) or <Radius>

    Input a dimensional value in the field and press Enter to set the outer diameter of the ring panel.

    Top

    Press the down arrow key and select Top to create a panel with top justification.

    Bottom

    Press the down arrow key and select Bottom to create a panel with bottom justification.

    Centre

    Press the down arrow key and select Centre to create a panel with centre justification.

The new PANE displays in the Model Explorer.

Refer to Non-Routed Item for further information.

Related Links