View the results of a Case Study

As a Case Study runs, the solution results for each case appear in the Case Study Editor, in the Results Table area. This includes the following information:

• The solution status for the case (the Solved column value).

• The time that the solver took to solve the case (the Duration column value).

• The values for all variables and parameters that you have added to the Case Study.

You can use the Duration value to determine which cases are giving the solver the most trouble. If you have failed cases, you can use the Solved value to determine which values for the manipulated variables and parameters result in an unconverged simulation.

You can generate plots for your Case Study results to visualize the effects of the changes in the manipulated variables and parameters. See Generate and configure a Case Study plot for more information.

View the results of a Case Study

1. On the Case Study Manager, select the Case Study, and then select Edit.

   The Case Study opens in the Case Study Editor.

2. In the Results Table area, review the solution results for each case.

   If you do not see any cases listed in the Results Table area, run the Case Study to populate the results. Depending on the size of your simulation and the number of cases in your Case Study, it may take a significant amount of time for the Case Study to run. See Number of Cases and Performance for more information.