Process description for the GG1 example simulation

The compressor system consists of the following:

• A Source model that contains the fluid that must be pressurized to send to the downstream unit.

• An inlet valve XV1, which acts as a check valve to avoid back flow to the upstream unit.

• A knockout drum V1, which ensures that compressor inlet is completely vapor.

• An after cooler E1, which cools the compressed gas to the required temperature at the downstream unit.

• A cold recycle anti-surge valve FV1 that is downstream of E1.

• A hot recycle anti-surge valve FV2 that is upstream of E1.