Maintenance - tab Corrective
- Last UpdatedMay 13, 2025
- 3 minute read
Properties of Maintenance - Corrective
The object Maintenance contains properties that can be edited by the user. Double-clicking the object will open the Properties screen of that object. (Alternatively, the Property Grid can be used to directly edit the data there).
Properties of Maintenance - tab Corrective
|
FIELD |
DESCRIPTION |
|
|
Number of times a component can be repaired before it has to be replaced. If a number > 0 is filled, then a UBM-Follow Up action should be entered as well. |
|
|
This field is only active if a value is entered in the Maint. Counter field. If the number of actions exceeds the Maintenance counter value, a UBM action is obtained from UBM follow-up. Selection is restricted to the number of UBM actions within this part. This field is obligatory if the Maintenance. Counter field is used |
|
|
Logistic time including the time required to obtain any parts. During the simulation, the response time is counted as part of the maintenance time. Therefore together they make up the maintenance time |
|
|
In this field, a delivery time can be entered, if no spare object is linked yet in the maintenance action. If such a link is present, the delivery time will be retrieved from the spare object, and the field will not allow direct editing of the value. To this end, the button (<) needs to be clicked which opens up the mutation screen with the connected spare object. If no spare object is linked, the (<) button serves as a jump-to action which calls the Stock tab to front. In this tab, a link may be set to a spare object. |
|
|
The maintenance time is shown here on this tab, although it is set through the General tab (the view is simplified, since a distribution if chosen is not shown here). The presence of this field only serves as part of a quick overview of the composing time factors of downtime in one tab. To see the maintenance time parameters in full and jump to the correct tab, a button (<) is provided. |
