Top 10 Maintenance Actions Report
- Last UpdatedAug 18, 2025
- 2 minute read
This report shows the 10 most common maintenance actions in a system. The percentage next to the number indicates the percentage that the maintenance action makes up of the total number of maintenance actions.
To print this simulation report, follow the steps below:
-
Open the module
Simulation -
Select a simulation on the left
-
Right click the model on the right
-
In the context menu, select the desired report:
A report similar to the one below will appear after some time:
Top 10 Maintenance actions
Top 10 Maintenance actions (follow up page)
Diagram
The frequency with which the top 10 maintenance action occurs in the simulated period can be read from the diagram.
In this example it can be seen that the CBM action 'Chain gear stuck due to reduced chain tension' occurs 117 times in total.
Report
The following fields are used in the report:
|
FIELD |
DESCRIPTION |
|
Location |
The location indicates where failure occurs. |
|
Part Tag |
Internal number or code can may have been assigned to the Part |
|
Description |
Description of the field (free text) |
|
Strategy |
Type of maintenance used to mitigate the failure |
|
Quantity |
Number of times the failure occurs during the simulation period |
|
Duration |
Duration is total maintenance time, as indicated in the FBM screen, for all FBM actions, so Quantity x Maintenance time per FBM action |
|
Costs |
Total costs for all FBM actions together, so Quantity x Costs per FBM-action. |
|
% of Total |
% of total is the percentage of specific failure of the total number of failures occurring during the simulation period. |
Remark: If an object is selected on a level which is too low, the report function will not be available (greyed out)