Add a Measurement point
- Last UpdatedNov 18, 2025
- 3 minute read
-
Under Available on the Connected Items for Measuring Station window, select the measurement point you want to add.
-
Select Connect.
The Station/Point Connection Configuration dialog appears.
Selected Items on the Station/Point Connection Configuration dialog
Item
Description
Multiplier
When calculating the balance, the volume and energy of the meter is multiplied by the multiplier. A positive number means that the meter's volume/energy is used to calculate the inVolume/inEnergy of the station. A negative number means that the meter's volume/ energy is used to calculate the outVolume/outEnergy of the station.
Run Ratio
The run ratio is used for the run ratio check. For example, if a station has two meters but it is expected that 60% of the flow will go through one meter and 40% through the other, then the run ratio should be set to 0.6 and 0.4 for these meters.
Note: The connections are date-time effective. The Effective Date Time is the date-time when the connection starts.
-
Select the Effective Date Time and the Expiry Date Time.
-
Select
to select the desired year.
The
on the left will list the years prior to the currently selected year, and the 
on the right will list future years.
-
If you want to scroll back or forward by one month, select on the Calendar dropdown menu and use
for back and 
for forward.
-
If you want to scroll back or forward by one year, select on the Calendar dropdown menu and use
for back and 
for forward.
-
-
Enter the Multiplier.
-
Enter the Run Ratio.
Note: The Run Ratio value is independent of the Multiplier for the measurement point.
-
Select Okay.
If you connect the unconnected point to a physical measuring station or to a logical measuring station, then the measurement point disappears from the list of Available measurement points and appears in the Connected list. A measurement point may only be connected to one physical measuring station at any date-time.
-
On the Connected Items for Measuring Station window, select Okay.
If you try to connect a point that is already connected to a physical measuring station, then the Connect Point Warning dialog appears.
-
Select OK to return to the Connected Items for Measuring Station window.
-
Select Okay, Cancel, or Disconnect.