Insulation
- Last UpdatedJan 24, 2023
- 2 minute read
Use the functionality available from the Insulation group of the UI to select the Insulation specification, apply it to the current selected element (a branch or component) or to a range of components and view the insulation in the 3D view applied to the selection.
|
Apply to CE |
Applies the insulation specification to the currently selected HVAC element (branch or component). |
|
Apply to Range |
Applies the insulation specification to a selected range in the 3D view.
|
|
Show Insulation |
Use this toggle to enable/disable if the insulation is displayed in the 3D view. |
Subcomponent
A sub component element in HVAC is used for general purpose sub elements which are placed under their container elements and mapped with soft types. The element can take any element type based on the Spec Ref and Design parameters provided by the user. The position and orientation attributes are set with respect to the owner element.
Sub components such as branch connectors or access panels are present on the surface of a parent element, these element types have additional volume and will refer to the insulation specification, insulation is also applied to them as per the settings.
Once the insulation has been applied, check for clashes the results are displayed in the Clashes window.
