Component Connection
- Last UpdatedFeb 19, 2025
- 2 minute read
Keywords
CONNECT
Description
This command places a p-point on the current Component face-to-face with the p-point of an adjacent Component. If the Connection Types or nominal bores of the Connected faces are not compatible, Model automatically Flips (reverses Arrive and Leave) the Component and tries again. If the adjacent element is an Attachment Point (ATTA) then this is ignored and Connection is attempted on the Next Component.
Examples |
|
|---|---|
|
CONNECT |
The arrive p-point of the Component is connected to the leave p-point of the Previous Component (refer to the Component connection image). |
|
CONNECT TO NEXT |
The leave p-point of the Component is connected to the arrive p-point of the next Component (refer to the Component connection image). |
|
CONNECT AND P3 IS U |
As first example and the off-line p-point is oriented upwards (refer to the Component connection image). |
Note:
Only adjacent Components (not Attachment Points) may be connected to; if Connection
Types or bores are incompatible, then an automatic FLIP takes place and CONNECT is
attempted again.
Command Syntax
>- CONnect -+- <marke> -+- TO <marke> -+- AND <bdir> IS <bdir> ->
| | |
| | ‘-->
| ‘-->
‘-->
Querying
.------------------<----------------.
/ |
>-- Query <marke> --*-- POSition --. |
| | |
‘--------------+-- WRT --. |
| | |
|-- IN ---+-- <gid> --’
|
‘-->
Component connection