Specifications
- Last UpdatedMay 05, 2023
- 2 minute read
The Specifications part of the Create Rung Ladder window displays all the available specifications for the rung ladder from the defaults.
The choices made on previous parts of the Create Rung Ladder determines which specifications are available for selection.
From the Ladder Specifications part of the Create Rung Ladder window:
|
Rung |
The selected defaults determines which rungs can be used for different width ranges. Once you have selected the width of the ladder, the rungs available for selection are then filtered. |
|
Stile |
The selected defaults determines which stiles can be used for different height ranges. Once you have selected the top and bottom elevations and the height of ladder has been calculated, the stiles available for selection are then filtered. |
From the Cage Specifications part of the Create Rung Ladder window:
|
Hoop |
The hoop specifications available for selection are determined by the selected defaults. |
|
Top Hoop |
The top hoop specifications available for selection are determined by the selected defaults. The functionality is only available if top hoops are defined for the selected defaults. |
|
Bottom Hoop |
The bottom hoop specifications available for selection are determined by the selected defaults. The functionality is only available if bottom hoops are defined for the selected defaults. |
|
Bar |
The bar specifications available for selection are determined by the selected defaults. |
The gate specifications available for selection from the Gate drop-down list are determined by the default specification. The default is None.
Click Next to display the Ladder Details part of the Create Rung Ladder window. Refer to Ladder Details for further information.
Click Back to return to the Ladder Assembly part of the Create Rung Ladder window.
Click Cancel to discard any inputs and close the Create Rung Ladder window.