Corner Mount LV Terminal

The task of creating an HVAC Component is initiated from the HVAC Window.

Select Extra Inline Equipment in the Categories drop-down list and then Corner Mount LV Terminal in the Available Type drop-down list to display the Corner Mounting LVT window:

The Corner Mounting LVT window default is a standard stock size, but can be changed by you using one of the following methods:

Standard Stock Sizes

In the Name(Ref) field, input the name of the HVAC component.

Note:
The fields will be pre-populated with default dimensions. These dimensions are governed by the details defined in the HVAC Catalog.

To choose from the standard stock sizes available from the HVAC Catalog, in the Stock Size drop-down list, click the required size for the HVAC component.

In the Front Direction specify the axis that should be used. Valid axes are E (East), N (North), U (Up), -E (negative East), -N (negative North) or -U (Negative Up).The Face Clash Vol field is pre-populated with the obstruction volume associated with the Corner Mounting LVT and the ducting.

Non Standard Stock Sizes (Special)

If you chose not to use a standard stock piece of HVAC, from the Stock Sizes drop-down list, click Special.

you are required to input the following dimensions:

• Name(Ref)

• Duct Diameter

• Body Radius (A)

• Body Length (B)

• Body clHeight (D)

• Arrive Extension

To visualize how the dimensions equate to the actual piece of HVAC, click Picture to display a detailed drawing for LV Terminal for Corner Mounting.

Note:
The fields will be pre-populated with default dimensions. These dimensions are governed by the details defined in the HVAC Catalog.

Specify a type of joint to use for the Arrive Joint. Refer to Create/Modify HVAC Component for a detailed description.

After selecting the type of joint to use for the Arrive Joint, you must enter the Front Direction.

In the Front Direction specify the axis that should be used. Valid axes are E (East), N (North), U (Up), -E (negative East), -N (negative North) or -U (Negative Up).

The Front Clash Vol field is pre-populated with the obstruction volume associated with the Corner Mounting LVT and the ducting.

In the Position list, select Connect or Unchanged:

• Click Connect (default when Create is selected) - connects the piece of HVAC to the previous one.

• Click Unchanged (default when Modify is selected) - positions the component at the co-ordinates 0.00.

  Note:
  Unchanged is usually used, when Modify is selected, it does not connect the component but positions it at 0.00, in effect in a floating position.

Click Defaults to reset all the fields back to when the Corner Mounting LVT window was opened.

Click Fit to orientate the Corner Mounting LVT to automatically match the outlet (p-leave) of the previous piece of HVAC to the inlet (p-arrive) of the next piece.

Click OK to create the Corner Mounting LVT component and close the Corner Mounting LVT Window. You will be returned to the HVAC Window

Click Cancel to discard all the field changes and close the Corner Mounting LVT window.